Software-in-the-Loop Validation of an Adaptive Particle Swarm Optimization-Based MPPT Controller for Real-Time Photovoltaic System
- Authors
-
-
Emmanuel T. ODEYEMI
Author
-
Ya’u S. HARUNA
Author
-
Ganiyu A. BAKARE
Author
-
Hassan B. MAMMAN
Author
-
Sabo M. HASSAN
Author
-
- Keywords:
- Adaptive Particle Swarm Optimization, Maximum Power Point Tracking, Software-in-the-Loop, Solar Photovoltaic Systems, and Dynamic Irradiance.
- Abstract
-
Maximum Power Point Tracking (MPPT) is essential for maximizing energy yield in photovoltaic (PV) systems under dynamic environmental conditions. This study presents a comparative evaluation and real-time Software-in-the-Loop (SIL) validation of conventional and intelligent MPPT algorithms for a 1.5 MW standalone PV system, representing a utility-scale installation with high current and dynamic complexity. The Adaptive Particle Swarm Optimization (APSO) algorithm is characterized by dynamic adjustments of inertia weight and acceleration coefficients, enhancing convergence speed and tracking accuracy. A high-fidelity MATLAB/Simulink model, integrating a DC–DC boost converter and dynamic irradiance profiles, was developed. P&O, INC, GA, and APSO were evaluated based on tracking efficiency, convergence speed, and steady-state ripple. The results show that APSO achieved the highest tracking efficiency (99.3%), the fastest convergence (0.8 s), and the lowest ripple (1.8%), outperforming GA, P&O, and INC. SIL validation further confirmed the feasibility and robustness of APSO, maintaining 99.0% efficiency and 1.6% ripple under real-time constraints. These findings establish APSO as a reliable, implementation-ready MPPT solution for large-scale PV systems.
- References
- Downloads
- Published
- 23-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Sarafa ISHOLA, Olusegun S. OLAOYE, Adeyinka A. ADEGBOLA, Isaac A. OLUREMI, Oluseye O. AGBEDE, Drying Kinetics and Combustion Characteristics of Carbonized Cashew Nut Shell Briquettes Under Open Sun, Passive and Active Solar Drying , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Nafisa A. ABDULHAMID, Danladi D. USMAN, Kabiru I. JAHUN, Rotkangmwa J. SATI, Yahaya U. JAURO, Abdulmajid M. HASHIR, Yusuf G. SHIMBURA, Development of a Solar Dryer with Multi-Products and a Residual Moisture Control System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mathew O. ADEOTI, Victor N. HARUNA, Omolayo M. IKUMAPAYI, Timothy A. ADEKANYE, Development and Characterization of Epoxy-Based Asbestos-Free Brake Pad Composites Reinforced with Cow Hoof Particulates , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mutiat S. YISA, Cross-Regional Energy Strategies: Evaluating Japan’s Power Blueprint for Nigeria’s Needs , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Chibuzor A. OKAFOR, Bello ABDULKAREEM, Najeem A. YEKEEN, Blessing A. OSULOYE, Yakubu O. HASSAN, Musa J. MAIKATO, Evaluation of the Effects of Charcoal Particle Sizes on Carburized Low Carbon Steel , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Suleiman ZUBAIR, Hassan T. ABDULAZEEZ, Bala A. SALIHU, Gambo MOHAMMED, A Low-Cost, Offline-Capable Wireless Soil Moisture Monitoring System for Smallholder Farmers: Design, Validation, and Agronomic Impact , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Danasabe GAMBO, Isyaku YA’U, Tisan A. GREGORY, Development of Free Space Optical Communication Testbed for Fog and Rain Attenuations Measurement , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Peter EDOKA, Assessment of the Role of Kogi State Government in Flood Mitigation in Lokoja, Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Yusuf L. SHUAIB-BABATA, Kabiru S. AJAO, Yusuf O. BUSARI, Ibrahim O. AMBALI, Toheeb A. NURUDEEN, John A. OKOLO, Gabriel A. LONGE, Inhibitory Potential of Blended Parkia biglobosa and Delonix regia Extracts on Corrosion of AISI 1007 Steel in 1.0 M Hydrochloric Acid Medium , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Mela I. L. LASHIRU, Ganiyu A. BAKARE, Sabo M. HASSAN, Kamilu O. LAWAL, Data-Driven Observability Enhancement in Active Distribution Networks via Optimal Co-Deployment of DGs and D-PMUs Using Hybrid APSO-ASDA , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, BAT-Optimized PID and ANFIS Torque-Based MPPT for a 0.5 MW PMSG-Based Wind Energy Conversion System Under Dynamic Wind Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
