Geotechnical Evaluation of Lateritic Soil Index Properties in Ekiti State Districts, Southwestern Nigeria for Road Pavement Construction
- Authors
-
-
Joshua T. AKINWAMIDE
Author
-
Jacob O. EHIOROBO
Author
-
Oluwayinka G. AKINWAMIDE
Author
-
- Keywords:
- Consistency tests, Grain size analysis, Lateritic soils, Road pavement construction, Specific gravity tests.
- Abstract
-
Focusing on the three Senatorial Districts of Ekiti State, this research examines local soil properties to assess their suitability for construction and infrastructure development. The investigation starts by analysing samples from the Central District, Southern, and Northern with a sample size of 160 per district, the research utilized standard laboratory procedures to assess key physical properties. Specifically, tests were performed to evaluate moisture content, specific gravity, and grading, alongside an analysis of Atterberg limits. Based on the AASHTO classification system, the soils in the Central District were classified into four categories (A-2-4, A-2-6, A-2-7, A-7-5), while the Southern District contained eight categories (A-2-4, A-2-5, A-2-6, A-2-7, A-4, A-5, A-6, A-7-5), and the Northern District had six categories (A-2-4, A-2-5, A-2-6, A-2-7, A-6, A-7-6). Results show that while Central District soils meet the requirements for base and sub-base layers, those from the Southern and Northern Districts are more effectively utilized in sub-base and sub-grade construction. Although stabilization may be needed to enhance their performance. In conclusion, the soils of Ekiti State are generally suitable for civil engineering purposes, with the Central District offering the most reliable materials for foundational, pavement, and construction projects.
- References
- Downloads
- Published
- 15-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Amina UTHMAN, Shamsuddeen SULAIMAN, Evaluation of Cost Factors Influencing the Adoption of Sustainable Construction Practices in Abuja, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdullahi YAHAYA, Ahmad ADO, Jaju A. MUHAMMAD, Zaharaddeen G. SANI, Baba A. OLUWA, Abdulazeez A. YUSUF, Kinetic Modelling of Sonocatalytic Phenol Degradation over Alumina-Supported Copper Oxide Catalyst , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Oluwaseun S. OGUNGBEMI, Geophysical Approach to Groundwater Resource Appraisal in Afe Babalola University, Ado-Ekiti, Southwestern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Usman HASSAN, An Assessment of Management Support Provided to Construction Equipment Operators Regarding Safety Practices and Protocols in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Shehu S. SHEHU, Samuel O. OLADIPUPO, Dominic S. NYITAMEN, Simulation and Performance Analysis of a Military Insignia Microstrip Patch Antenna at 2.45 GHz For Wireless Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Bala I. ABDULKARIM, Yusuf M. BABA, Suleiman I. ENEHE, Kamoru A. SALAM, Umar IDRISS, Synthesis of Activated Carbon from Corncob for the removal of Lead (Pb²⁺) ions from Aqueous solution using a packed bed Adsorption Column , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Rhoda I. ADELAJA, Ruth R. ADELAJA, Henry OTOBRISE, Adefope OWOJORI, Babatunde ADEBO, Assessment of Outdoor Radiation Exposure in an Academic Environment: A Case Study of Lead City University , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Hyelni G. MSHELIA, Abdulfatai JIMOH, Mohammed A. EVUTI, Abubakar A. IBRAHIM, Abdulwahab GIWA, Adeola G. OLUGBENGA, Potential of Onion Skin, Luffa cylindrica, and Corn Cob as Cellulose Sources: A Study of Their Proximate, Ultimate, and Morphological Properties , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Tahiru MOHAMMED, Muhammad B. MAINA, Abba B. MUHAMMAD, Muhammad SHUWA, From Local Sand to Functional Silicon: An Integrated Pathway for Producing Photovoltaic-Grade Material from Nigerian Silica Sand , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Folakemi B. OYEYEMI, Usman A. ABDURRAHMAN, Detecting and Mitigating Cybersecurity Threats in Nigerian Commercial Banks Using Machine Learning: A Case Study of Selected Institutions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
