Geotechnical Evaluation of Lateritic Soil Index Properties in Ekiti State Districts, Southwestern Nigeria for Road Pavement Construction
- Authors
-
-
Joshua T. AKINWAMIDE
Author
-
Jacob O. EHIOROBO
Author
-
Oluwayinka G. AKINWAMIDE
Author
-
- Keywords:
- Consistency tests, Grain size analysis, Lateritic soils, Road pavement construction, Specific gravity tests.
- Abstract
-
Focusing on the three Senatorial Districts of Ekiti State, this research examines local soil properties to assess their suitability for construction and infrastructure development. The investigation starts by analysing samples from the Central District, Southern, and Northern with a sample size of 160 per district, the research utilized standard laboratory procedures to assess key physical properties. Specifically, tests were performed to evaluate moisture content, specific gravity, and grading, alongside an analysis of Atterberg limits. Based on the AASHTO classification system, the soils in the Central District were classified into four categories (A-2-4, A-2-6, A-2-7, A-7-5), while the Southern District contained eight categories (A-2-4, A-2-5, A-2-6, A-2-7, A-4, A-5, A-6, A-7-5), and the Northern District had six categories (A-2-4, A-2-5, A-2-6, A-2-7, A-6, A-7-6). Results show that while Central District soils meet the requirements for base and sub-base layers, those from the Southern and Northern Districts are more effectively utilized in sub-base and sub-grade construction. Although stabilization may be needed to enhance their performance. In conclusion, the soils of Ekiti State are generally suitable for civil engineering purposes, with the Central District offering the most reliable materials for foundational, pavement, and construction projects.
- References
- Downloads
- Published
- 15-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Oluwayinka. G. AKINWAMIDE, Olugbenga O. AMU, Christopher FAPOHUNDA, Prediction of International Roughness Index of Flexible Pavement Using Machine Learning-Based Predictive Framework in Ekiti State , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Habibat O. YUSUFU, Yakubu D. MOHAMMED, Rose JONATHAN, Shamsuddeen SULAIMAN, Impact of Health and Safety Management on Safety Performance of Small and Medium-Sized Construction Firms in Abuja , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdulrahman S. USMAN, Folorunsho ABERUAGBA, Moses A. OLUTOYE, Umar MUSA, Mohammed ALHASSAN, Calcium Oxide Derived from Okpella Limestone as a Heterogeneous Catalyst for Biodiesel Production: Synthesis, Characterisation and Stability Assessment , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Chibuzor A. OKAFOR, Bello ABDULKAREEM, Najeem A. YEKEEN, Blessing A. OSULOYE, Yakubu O. HASSAN, Musa J. MAIKATO, Evaluation of the Effects of Charcoal Particle Sizes on Carburized Low Carbon Steel , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Salisu MOHAMMED, Abdulfatai JIMOH, Abdullahi M. EVUTI, Abdulwahab GIWA, Abubakar A. IBRAHIM, Pretreatment and Characterization of Selected Precursors for Chitin/Chitosan Production , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Adegboyega L. ALUKO, Ayodeji T. BALOGUN, Environmental Impact of Gold Mining Activities and Sustainable Mitigation Approaches: Case Study of Ilesa Surrounding areas, Osun State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mathew O. ADEOTI, Victor N. HARUNA, Omolayo M. IKUMAPAYI, Timothy A. ADEKANYE, Development and Characterization of Epoxy-Based Asbestos-Free Brake Pad Composites Reinforced with Cow Hoof Particulates , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Chinemeogo C. OZIOKO, Ikechukwu C.-E. IKE-EZE, Nnanyelugo O. EDWIN, Dimelu K. EBUBE, Charles MBOHWA, Investigation of the Mechanical and Thermal Properties of Waste Toner Powder Reinforced Polyester Composite for Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Olabanji M. KADI, Sustainability in Construction: A Quantity Surveyor's Perspective on Green Building Practices , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Martins Y. OTACHE, Iyanda M. ANIMASHAUN, Sadeeq A. MOHAMMED, Emmanuel O. AGBESE, Spatiotemporal Variability and Trend Analysis of Rainfall and Temperature in Northern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
You may also start an advanced similarity search for this article.
