Geotechnical Evaluation of Lateritic Soil Index Properties in Ekiti State Districts, Southwestern Nigeria for Road Pavement Construction
- Authors
-
-
Joshua T. AKINWAMIDE
Author
-
Jacob O. EHIOROBO
Author
-
Oluwayinka G. AKINWAMIDE
Author
-
- Keywords:
- Consistency tests, Grain size analysis, Lateritic soils, Road pavement construction, Specific gravity tests.
- Abstract
-
Focusing on the three Senatorial Districts of Ekiti State, this research examines local soil properties to assess their suitability for construction and infrastructure development. The investigation starts by analysing samples from the Central District, Southern, and Northern with a sample size of 160 per district, the research utilized standard laboratory procedures to assess key physical properties. Specifically, tests were performed to evaluate moisture content, specific gravity, and grading, alongside an analysis of Atterberg limits. Based on the AASHTO classification system, the soils in the Central District were classified into four categories (A-2-4, A-2-6, A-2-7, A-7-5), while the Southern District contained eight categories (A-2-4, A-2-5, A-2-6, A-2-7, A-4, A-5, A-6, A-7-5), and the Northern District had six categories (A-2-4, A-2-5, A-2-6, A-2-7, A-6, A-7-6). Results show that while Central District soils meet the requirements for base and sub-base layers, those from the Southern and Northern Districts are more effectively utilized in sub-base and sub-grade construction. Although stabilization may be needed to enhance their performance. In conclusion, the soils of Ekiti State are generally suitable for civil engineering purposes, with the Central District offering the most reliable materials for foundational, pavement, and construction projects.
- References
- Downloads
- Published
- 15-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Yusuf M. YAHAYA, Factors Contributing to the Erosion of Freehand Sketching Competence in Technology Education: A Case Study of Bayero University, Kano , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Zainab B. LAPAI, Joseph A. OJENIYI, Ismail IDRIS, Abdulkadir O. ABDULBAKI, Jennifer BALA, Entropy-Guided Neural Architecture for Family-Level Classification of Windows Ransomware , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muazu D. ZAKARI, Md R. KAMAL, Wada I. MUHAMMAD, Nuraddeen M. NASIDI, Dahiru MOHAMMED, Agro-Hydrological Modelling Systems in Peninsula Malaysia: A Comprehensive Review and a Guide towards Model Development , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Danasabe GAMBO, Isyaku YA’U, Tisan A. GREGORY, Development of Free Space Optical Communication Testbed for Fog and Rain Attenuations Measurement , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Francis O. BOROKINNI, Olarewaju T. OGINNI, Ridwan O. RAJI, Kolawole ALONGE, Effects of Quenching Media and Heat Transfer Rate on the Hardness and Microstructure of Low-Carbon Steel , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Damilare L. ADEKEYE, Uche M. IROKA, A Microcontroller-Based Intelligent Electricity Theft Detection and Prevention System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Benedict O. EDENSETING, Innocent O. OBOH, Alexander A. JOCK, Effective Food Waste Utilization: A Veritable Source of Biofuel for Nigerian Economic Sustenance and Development - A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Bala I. ABDULKARIM, Phebe O. JAMES, Utilization of Microbial Fuel Cells for Electricity Generation from Gwagwalada Abattoir Wastewater , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Emmanuel T. ODEYEMI, Ya’u S. HARUNA, Ganiyu A. BAKARE, Hassan B. MAMMAN, Sabo M. HASSAN, Software-in-the-Loop Validation of an Adaptive Particle Swarm Optimization-Based MPPT Controller for Real-Time Photovoltaic System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adekunle A. YEKINNI, Adeniyi O. ADESINA, Kazeem A. BELLO, Effect of Subcritical Tempering on the Microstructural, Mechanical and Corrosion Behaviour of Mild Steel , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
