Performance Evaluation of Pervious Concrete Containing Glass Cullet and Glass Powder for Sustainable Construction
- Authors
-
-
Afeez A. AWOLOKUN
Author
-
Olusegun O. ALUKO
Author
-
Temitope F. AWOLUSI
Author
-
Mayowa A. OGIDI
Author
-
- Keywords:
- Pervious concrete, glass cullet, glass powder, sustainable construction, compressive strength.
- Abstract
-
The utilization of waste materials in concrete production has gained significant attention due to its potential for sustainable construction and environmental conservation. This study evaluates the performance of pervious concrete incorporating glass cullet as partial replacement fo r coarse aggregate and glass powder as supplementary cementitious material. The experimental program investigated the physical and mechanical properties of the materials, as well as compressive strength, abrasion resistance, water absorption, and permeability of the produced mixes. Results indicate that up to 20% replacement of cement with glass powder improved compressive strength due to its pozzolanic activity, while glass cullet effectively replaced natural aggregates without adversely affecting workability. Pervious concrete with glass powder demonstrated reduced porosity and enhanced durability compared to control mixes. The findings suggest that integrating waste glass into pervious concrete not only improves mechanical and durability properties but also offers a sustainable solution for waste management and eco-friendly construction.
- References
- Downloads
- Published
- 27-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Iyanda M. ANIMASHAUN, Abubakar S. MOHAMMED, Ibrahim A. KUTI, Peter A. OBASA, Rashidat ANIYIKAYE, Yahaya MOHAMMED, Yusuf M. OTACHE, Artificial Intelligence of Things (AIoT) for Precision Irrigation: A Comprehensive Review of Applications, Challenges, and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Jafaru A. MOHAMMED, Thomas N. GUMA, Malachy SUMAILA, Mahdi MAKWAYO, A Review of Local Manufacturing of Borehole Windmill Gear Trains Using Reverse Engineering and Integrated Braking Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Amina N. IBRAHIM, Petrus NZEREM, Mojeed O. OLOGUN, Formulation and Evaluation of Drilling Fluids from Waste Engine Oil and Algae-Based Surfactants , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Usman A. ALI, Munir A. ADEWOYE, Adamu U. ABDULLAHI, Determinants of Blockchain Adoption for Academic Certificate Verification: Insights from Verification Officers for Sustainable Education in Nigerian Higher Education Institutions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ibrahim M. GANA, Abdullahi YUSUF, Agidi GBABO, Micheal EPHRAIM, Abubakar M. HASSAN, Development and Testing of an Automated Solar-Powered Nutrient Film Technique (NFT) Hydroponic Planting System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdulrahman B. GAMBO, Carbon Capture and Mechanical Design of Membrane Reactors: A Systematic Review and Design-Performance Framework for Sustainable Energy Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Paramdi S. ABARI, Abdulwahab O. AUDU, Ahmad-Tijani USMAN, Charity T. METIBOBA, Peter O. ANIKOH, Performance Evaluation and Design Analysis of Hybrid Constructed Wetlands for Aquaculture Effluent Treatment under Tropical Conditions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mutiat S. YISA, Cross-Regional Energy Strategies: Evaluating Japan’s Power Blueprint for Nigeria’s Needs , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdulrahman S. USMAN, Folorunsho ABERUAGBA, Moses A. OLUTOYE, Umar MUSA, Mohammed ALHASSAN, Calcium Oxide Derived from Okpella Limestone as a Heterogeneous Catalyst for Biodiesel Production: Synthesis, Characterisation and Stability Assessment , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. ABDULLAHI, Iyanda M. ANIMASHAUN, Ibrahim A. ABDULFATAI, George U. STEPHEN, Spatial Scale Effects on the Relationship Between Land Use/Land Cover Change and Potential Evapotranspiration in Niger State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
