Reducing Electromagnetic Radiation Around the Fourth Generation Base Stations
- Authors
-
-
Christopher C. NWAOGU
Author
-
Nnamdi AHUCHAOGU
Author
-
- Keywords:
- Electric field strength, Magnetic Field strength, Power density, electromagnetic radiation, filters.
- Abstract
-
Electromagnetic radiations and interferences, poses health hazards both to man and his environment the importance of reducing it cannot be over emphasized. This work focused on the reduction of electromagnetic interference (EMI) around 4G base station using filter techniques. The projected rise in wireless communication network generations and the inherent electromagnetic emission that come along with the technologies have necessitated the search for better ways of reducing the electromagnetic interference. Considering the current electromagnetic interference concerns, the base station is the hub of the electromagnetic interference. This research examined different ways of deploying the finite impulse response filters (FIR) at the base station level to help reduce the impact of EMI around the 4G base stations. The research adopted the finite impulse response (FIR) filter technique, which is connected at the transceiver point at the base station level. The data used for analysis in the developed model were extracted from the daily collection of data from the service provider operators. Electromagnetic interference (EMI) for the filtered and unfiltered base stations were analyzed using the International Commission on Non-Ionizing Radiation Protection (ICNIRP) model. Data for five 4G base station within the Umuahia metropolis were used. The results obtained for 4G base stations showed that the deployment of Filter reduced the electromagnetic power density around a 4G base station. As without the filters the power densities were 3.755, 2.708, 1.280, 0.681, 0.412, 0.273, 0.193, 0.144, 0.111, 0.088 and 0.072. On the deployment of the FIR filters the power densities were reduced to 3.552, 2.562, 1.211, 0.645, 0.390, 0.258, 0.183, 0.105, 0.083 and 0.068 respectively.
- References
- Downloads
- Published
- 25-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Abdulrasheed MUSTAPHA, Kolawole O. MORAKINYO, Seyi O. FARODOYE, Rilwan B. HABEEB, Oluwatimilehin I. ADEBAMBO, Sunday F. OLAWALE, Evaluation of Green Architectural Strategies for Thermal Comfort in Four-Star Hotels in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Muhammad M. HAMIDU, Mathew KATAMBI, Omar FARUQ, Techno-Economic and Environmental Assessment of a Solar PV-Based Microgrid for Residential Electrification in Gwange I, Maiduguri Using HOMER Pro , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Luqman K. SALATI, Sani D. MUHAMMAD, Jacob T. ADEYEMO, Simulation of Trucks Haulage Operation at Ashaka Cement Company in Gombe State, North-Eastern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Bala YAHAYA, Characterization of Soil Quality Parameters in Sector 2 of Watari Irrigation Project, Kano , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Mu’azu ABUBAKAR, Abubakar B. ALIYU, Dauda GARBA, Fabrication, Characterization, and Application of Clay-Based Ceramic Membranes for Oily Wastewater Treatment: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muhammad M. ABDULLAHI, Iyanda M. ANIMASHAUN, Ibrahim A. ABDULFATAI, George U. STEPHEN, Spatial Scale Effects on the Relationship Between Land Use/Land Cover Change and Potential Evapotranspiration in Niger State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Oyeyemi T. AFOROLAGBA-BALOGUN, Olumide A. TOWOJU, Characterization of Fuel Produced from Nylon (Polyamide) and Polyethylene Terephthalate (PET) Wastes with Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Victoria A. UMEJURU, Isaac E. IHUA-MADUENYI, Adaobi S. NWOSI-ANELE, Performance Evaluation and Economic Assessment of Electrical Submersible Pumps for Heavy Oil Production in Mature Niger Delta Oilfields , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Obafemi A. IBITOYE, Jemimah O. TOLU-ALALADE, Solar-Powered Low-Cost Housing: Designing Off-Grid Communities with Interlocking Stabilised Soil Blocks (ISSB) , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Umar A. ADAMU, Ya’u S. HARUNA, Ganiyu A. BAKARE, Buhari H. MAMMAN, Kunduli MUSTAPHA, Hadi M. ADAMU, Ismaila MAHMUD, Design and Simulation of a 200 MWp Floating Solar PV Plant Integrated with the Kainji Hydropower Plant, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
