Reducing Electromagnetic Radiation Around the Fourth Generation Base Stations
- Authors
-
-
Christopher C. NWAOGU
Author
-
Nnamdi AHUCHAOGU
Author
-
- Keywords:
- Electric field strength, Magnetic Field strength, Power density, electromagnetic radiation, filters.
- Abstract
-
Electromagnetic radiations and interferences, poses health hazards both to man and his environment the importance of reducing it cannot be over emphasized. This work focused on the reduction of electromagnetic interference (EMI) around 4G base station using filter techniques. The projected rise in wireless communication network generations and the inherent electromagnetic emission that come along with the technologies have necessitated the search for better ways of reducing the electromagnetic interference. Considering the current electromagnetic interference concerns, the base station is the hub of the electromagnetic interference. This research examined different ways of deploying the finite impulse response filters (FIR) at the base station level to help reduce the impact of EMI around the 4G base stations. The research adopted the finite impulse response (FIR) filter technique, which is connected at the transceiver point at the base station level. The data used for analysis in the developed model were extracted from the daily collection of data from the service provider operators. Electromagnetic interference (EMI) for the filtered and unfiltered base stations were analyzed using the International Commission on Non-Ionizing Radiation Protection (ICNIRP) model. Data for five 4G base station within the Umuahia metropolis were used. The results obtained for 4G base stations showed that the deployment of Filter reduced the electromagnetic power density around a 4G base station. As without the filters the power densities were 3.755, 2.708, 1.280, 0.681, 0.412, 0.273, 0.193, 0.144, 0.111, 0.088 and 0.072. On the deployment of the FIR filters the power densities were reduced to 3.552, 2.562, 1.211, 0.645, 0.390, 0.258, 0.183, 0.105, 0.083 and 0.068 respectively.
- References
- Downloads
- Published
- 25-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Oluwadare J. AKINDUGBAGBE, Adefope OWOJORI, Emmanuel AGBENYI, Babatunde ADEBO, Gamma Shielding Capabilities of Some Selected Materials Within Ibadan Metropolis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Habib I. ABDULAZEEZ, Bala ABDULLAHI, Abdullahi AHMED, Ibrahim A. TUKUR, Experimental Investigation of Solar Photovoltaic Tilt Angles for Maximum Energy Harvest in Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Vincent B. ONIGBARA, Muftau A. GBENLE, Sunday I. AGU, Mechanical and Biological Performance of Titanium Hydroxyapatite Composites for Biomedical Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adebola S. AKOLADE, Precious A. OLAOMOTITO, Abibat Y. ADEBIYI, Oluwatunmise P. ABOLARIN, Opeyemi I. ADETUNJI, Kola OGEDENGBE, Production and Evaluation of Cement-Bonded Composites Board Made from Banana Pseudo Stem , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Aminu BALA, Nasiru B. KADANDANI, Isiyaku ABUBAKAR, Performance Evaluation of Fuzzy Logic and Fractional Order PI Controllers for Electric Vehicle Wireless Charging System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Hafsah A. ABDULRAHMAN, Muhammad M. HAMIDU, Techno-Economic Optimization of a Hybrid PV-Wind-Waste-to Energy System for the University of Maiduguri , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mohammed A. GANA, Zaka A. MSHELIA, Isuwa S. AJI, Alhaji GUJJA, Lawan A.M. KOLO, Investigation and Comparative Analysis of Natural Moulding Sands from Five Deposits in Maiduguri, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Zaharaddeen MUSA, Aliyu BELLO, Haris A. DANLADI, Design and Construction of Dual Input Mobile Solar Generator for Reliable Off-Grid Power , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar S. MOHAMMED, Mohammed ALIYU, Mohammed U. GARBA, Ibrahim S. MOHAMMED, Ibrahim A. KUTI, Meshack S. IMOLOGIE, Umaru MUSA, Olalekan D. ADENIYI, Peter A. ADEOYE, Abubakar G. ISAH, Folarin T. OLORUNMOTITO, Development and Packaging of Eco-friendly Biosolid Briquettes Synthesised with Bagasse for Green Energy Generation and Utilisation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ibrahim M. GANA, Abdullahi YUSUF, Agidi GBABO, Micheal EPHRAIM, Abubakar M. HASSAN, Development and Testing of an Automated Solar-Powered Nutrient Film Technique (NFT) Hydroponic Planting System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
