Assessment of Vibration and Noise Impacts of Drilling and Blasting Operations on Urban Structures: A Case Study of Zeberced Quarry, Abuja
- Authors
-
-
Kayode A. IDOWU
Author
-
Favour O. BENJAMIN
Author
-
Emmanuel B. SAMANI
Author
-
- Keywords:
- Blasting, vibration, noise pollution, Peak Particle Velocity, urban structures.
- Abstract
-
This study assesses ground vibration and noise impacts from blasting operations at Zeberced Quarry, Abuja, on nearby urban structures within a 500–1000 m radius. Instrumental monitoring of eleven blast events recorded Peak Particle Velocity (PPV) using a portable seismograph and noise levels using a Class 1 precision sound level meter. Structural inspections were conducted on twenty buildings, complemented by a perception survey of thirty residents. Results show PPV values ranged from 2.50 mm/s at 500 m to 0.76 mm/s at 1000 m; significantly below the NESREA regulatory limit of 8 mm/s and USBM structural damage threshold of 50 mm/s, indicating minimal risk of direct structural failure. However, noise levels peaked at 68.20 dB(L) at 500 m, exceeding the NESREA daytime limit of 65 dB(L), though declining to 61.98 dB(L) at 1000 m. Resident surveys revealed 80% reported disturbance, including headaches, sleep disruption, and anxiety. The study concludes that while vibration-induced structural damage risk is low, noise pollution represents a critical environmental challenge requiring mitigation through acoustic barriers, controlled blasting schedules, and improved community notification systems.
- References
- Downloads
- Published
- 15-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Tina I. FRANCIS-AKILAKI, Raymond A. EKEMUBE, Design, Construction, and Performance Evaluation of an Efficient Ethanol Stove for Domestic Cooking Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abubakar A. IBRAHIM, Fatimah Y. GARBA, Fatimah A. MUHAMMAD, Ismail B. ADEFESO, Bello A. ISAH, Jacob OLAYIWOLA, Industrial and Biomedical Applications Biobased Polymers of Polylactic Acid and Polyhydroxybutyrate: A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Vandi JUSU, Eugene O. AGBACHI, Jibril A. BALA, Empirical Load Profiling and Categorisation for a Hybrid Renewable Microgrid Serving an Integrated Farm in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Nnamdi S. OKOMBA, Adedayo A. SOBOWALE, Adebimpe O. ESAN, Bolaji A. OMODUNBI, Taiwo A. AWOYEMI, Development of an Intelligent-Based Elevator System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sati C. NSHOL, Saeed Y. UMAR, Suleiman A. YERO, Modification of the Engineering Properties of Road Base Course Soil Materials with Cement and Polyethylene Terephthalate (PET) , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oyeyemi T. AFOROLAGBA-BALOGUN, Olumide A. TOWOJU, Characterization of Fuel Produced from Nylon (Polyamide) and Polyethylene Terephthalate (PET) Wastes with Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Chukwuemeka S. IBEH, Abubakre O. KAMARDEEN, Saka A. ABDULKAREEM, Aliyu A. ABDULLAHI, Experimental Study on the Characterisation and Thermo-Physical Properties of Graphene-Agro Based Hybrid Nanofluids , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oluwaseun S. OGUNGBEMI, Aquifer Characterisation and Vulnerability Assessment in a Typical Basement Complex Terrain , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Emma S. EKPO, Mokọ́ládé JOHNSON, Constructing Meaning and Enhancing Well-Being: The Role of Place Attachment, Place Identity, and Sense of Place in Architectural Studio Environments , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
