Simulation of Trucks Haulage Operation at Ashaka Cement Company in Gombe State, North-Eastern Nigeria
- Authors
-
-
Luqman K. SALATI
Author
-
Sani D. MUHAMMAD
Author
-
Jacob T. ADEYEMO
Author
-
- Keywords:
- Initial void ratio, natural moisture content, settlement, compression ratio, one-dimensional consolidation.
- Abstract
-
This study examined the simulation of truck haulage operation at Ashaka Cement Company in Ashaka, Gombe State, North-eastern Nigeria. Data collected included cycle time, tonnage of limestone produced and truck capacity. Field data plotted on Microsoft Excel software was used in generating prediction equations through polynomial model expressions. The model was then validated using historical data of truck haulage, and subsequently simulated. Results of the study showed that the optimum cycle time of North-North pit was 39 minutes long, producing 7587 tonnes per day, the cycle time for the North-West pit was 26 minutes, peaking 8100 tonnes per day; and the South-West pit cycle time, lasted 19 minutes and reaching up to 8640 tonnes per day respectively. The findings imply that truck haulage operation in the company has attained optimum production. To sustain this feat, it was recommended that hindrances to production such as boulders hook (over size), buildup of wet material and cleaning-associated delays (rollers, affront feeder) should be minimised to the bearest minimum.
- References
- Downloads
- Published
- 15-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Olatunde A. AKANO, Wariz A. ISMAEL, Ayomikun A. AWOSEYI, Femi AYO, Ifeoluwa M. OLANIYI, Jide E.T. AKINSOLA, Short Messaging Service Spam Detection Model Using Natural Language Processing and Deep Learning Techniques , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Emmanuel O. AGBENYI, Adefope OWOJORI, Oluwadare J. AKINDUGBAGBE, Babatunde ADEBO, Chigbo I. OKEREKE, Impact Assessment of Natural Radionuclides in Cassava Tubbers Harvested from a Farmlands Around Quarry in Moniya Ibadan, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oyeyemi T. AFOROLAGBA-BALOGUN, Olumide A. TOWOJU, Characterization of Fuel Produced from Nylon (Polyamide) and Polyethylene Terephthalate (PET) Wastes with Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sheidu S. ONIMISI, Usman B. ABDULLAHI, Hayatudden S. BARAYAIS, Abubakar M. MUHAMMAD, Abubakar G. ISAH, Abubakar S. MOHAMMED, Mohammed U. GARBA, Safety Evaluation of Orifice Plate in Natural Gas Pipeline using Computer Aided Engineering (CAE): A Step Towards Food Security , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Amina UTHMAN, Shamsuddeen SULAIMAN, Evaluation of Cost Factors Influencing the Adoption of Sustainable Construction Practices in Abuja, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muyideen O. MOMOH, Emmanuel I. AWODE, Gowon SULE, Umar ABUBAKAR, Ikechukwu O. ALUM, Usman K. AMINU, Bio-Inspired Flight Mechanisms for Unmanned Aerial Vehicles: An Overview , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mutiat S. YISA, Cross-Regional Energy Strategies: Evaluating Japan’s Power Blueprint for Nigeria’s Needs , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Adebola S. AKOLADE, Precious A. OLAOMOTITO, Abibat Y. ADEBIYI, Oluwatunmise P. ABOLARIN, Opeyemi I. ADETUNJI, Kola OGEDENGBE, Production and Evaluation of Cement-Bonded Composites Board Made from Banana Pseudo Stem , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Oluyemi S. ONIFADE, Olusegun O. AJIDE, Development and Performance Evaluation of a Semi-Automated Impact Fracture Tester , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mohammed U. GARBA, Musa A. ABDULLAHI, Isah RABI, Saadatu A. GORO, Habibu UTHMAN, Abubakar S. MOHAMMED, Umaru AHMADU, Usman S. ONODUKU, Recovery of Lithium Carbonate from Nigerian Lepidolite Ore via Roasting-Leaching-Precipitation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
