Open Radio Access Network (ORAN) Deployment Strategies for Remote Areas
- Authors
-
-
Taiwo J. DURODOLA
Author
-
Suleiman ZUBAIR
Author
-
James AGAJO
Author
-
- Keywords:
- Open RAN, rural deployment, functional split, SMO/RIC, neutral-host.
- Abstract
-
Extension of mobile coverage to sparsely populated rural and remote regions remain a global priority and presents unique challenges. This is due to the low population density; limited terrestrial backhauls and intermittent power associated with these regions. The disaggregation, open interfaces, RIC/SMO automation and potential cost-efficiencies of Open RAN promise architectural flexibility to improve economics and operations of Open RAN in rural and remote environments. This paper presents a systematic literature review of Open RAN deployment strategies in rural and remote areas. The review synthesizes academic studies, industry white papers, vendor/operator case reports and analyst studies. The literature supports strategies that include: (1) models that support infrastructure (Spectrum and Site) sharing integrated with renewable power sources and energy-aware features to manage OPEX and site autonomy (2) cloud-native DU/CU placement at regional edge sites combined with site local intelligence (RIC/SMO) for energy and radio optimization. (3) Hybrid backhaul using fiber/microwave for high-capacity node and satellite link or TVWS as backup or last-mile connection. Open RAN can make rural coverage more cost-effective when deployments are carefully designed using topology-aware functional splits, hybrid backhaul architectures, shared infrastructure models, robust SMO/RIC automation, and renewable energy solutions. Significant gaps persist in standardized TCO assessments and long-term, multi-vendor operational studies for rural and remote deployments.
- References
- Downloads
- Published
- 13-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Yahaya U. JAURO, Danladi D. USMAN, Lawan G. ABUBAKAR, Yusuf G. SHIMBURA, Aminu MOHAMMED, Design and Fabrication of Tapered Screw Briquetting Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mukhtar N. YAHYA, Sohaib ALHAJHUSSEIN, Wastewater Analysis Using Kubota Membrane Bioreactor System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Tina I. FRANCIS-AKILAKI, Onimi O. ASHAMA, Raymond A. EKEMUBE, Vibration Analysis as a Transformative Approach to Condition-Based Monitoring , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Tina I. FRANCIS-AKILAKI, Raymond A. EKEMUBE, Design, Construction, and Performance Evaluation of an Efficient Ethanol Stove for Domestic Cooking Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Damilare L. ADEKEYE, Uche M. IROKA, A Microcontroller-Based Intelligent Electricity Theft Detection and Prevention System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Zainab B. LAPAI, Joseph A. OJENIYI, Ismail IDRIS, Abdulkadir O. ABDULBAKI, Jennifer BALA, Entropy-Guided Neural Architecture for Family-Level Classification of Windows Ransomware , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Danladi K. GARBA, Emmanuel O. AWEDA, Nuhu A. ADEMOH, Fredrick NGOLEMASANGO, Pascal A. UBI, Akor TERNGU, Lawal KABIR, Shuaibu O. YAKUBU, The Effects of Gum Arabic Matrix on the Hardness and Water Absorption of Agro-Based (Banana Pseudostem) Hybrid Composites , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala I. ABDULKARIM, Phebe O. JAMES, Utilization of Microbial Fuel Cells for Electricity Generation from Gwagwalada Abattoir Wastewater , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, Francis O. BOROKINNI, Friday ONUH, Tunde O. OGUNDANA, Adebayo I. OLUMOROTI, Developments and Applications of Additive Manufacturing in the Automotive Industry , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olawale J. OLALUYI, Johnson O. ADEOGO, Aduragbemi F. OJO, Olarewaju T. OGINNI, Design and Construction of Transistor Based Water Level Indicator Tank with Overflow Alarm , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Suleiman ZUBAIR, Hassan ABDULAZEEZ, Bala A. SALIHU, Abubakar A. SHUAIBU, Design and Implementation of a BLE 5.0-Enabled Wearable Finger Mouse Using the XIAO nRF52840 Platform , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Suleiman ZUBAIR, Hassan T. ABDULAZEEZ, Bala A. SALIHU, Gambo MOHAMMED, A Low-Cost, Offline-Capable Wireless Soil Moisture Monitoring System for Smallholder Farmers: Design, Validation, and Agronomic Impact , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
