Solar-Powered Low-Cost Housing: Designing Off-Grid Communities with Interlocking Stabilised Soil Blocks (ISSB)
- Authors
-
-
Obafemi A. IBITOYE
Author
-
Jemimah O. TOLU-ALALADE
Author
-
- Keywords:
- Initial void ratio, Energy efficiency; Interlocking Stabilised Soil Blocks (ISSB); solar energy; off-grid housing; sustainable design.
- Abstract
-
This study explores the integration of solar photovoltaic (PV) systems with Interlocking Stabilised Soil Blocks (ISSB) to develop affordable, energy-efficient housing models for Nigeria’s off-grid communities. Using quantitative survey data from 424 respondents including architects, engineers, builders, and residents the research assessed awareness, perceived compatibility, affordability, and willingness to adopt ISSB–solar housing. Statistical analysis through chi-square, Pearson correlation, and ANOVA revealed a strong positive perception of ISSB–solar integration (mean = 4.12; SD = 0.78), with significant relationships between affordability and adoption (r = 0.52, p < .01) and between thermal comfort and energy efficiency (r = 0.47, p < .01). Over 70 % of participants affirmed that ISSB structures can safely support PV panels, and 65 % recognized reduced long-term energy costs despite higher initial investment. The findings demonstrate that coupling ISSB with solar systems enhances thermal comfort, promotes energy independence, and aligns with sustainable development goals. The study recommends financial incentives, technical capacity-building, and community-driven pilot projects to scale up solar-powered ISSB housing as a pathway toward resilient, low-carbon rural development in Nigeria.
- References
- Downloads
- Published
- 13-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Ibrahim M. GANA, Abdullahi YUSUF, Agidi GBABO, Micheal EPHRAIM, Abubakar M. HASSAN, Development and Testing of an Automated Solar-Powered Nutrient Film Technique (NFT) Hydroponic Planting System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abubakar M. ALI, Haruna IBRAHIM, Ephraim G. KEFAS, Thermal Plasma Gasification of Municipal Solid Waste: Principles, Technological Advances, Challenges, and Future Prospects , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Ayobami O. IDOWU, Integration of Green Technologies for Sustainable Facility Management of Public Buildings in Edo State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Amina UTHMAN, Shamsuddeen SULAIMAN, Evaluation of Cost Factors Influencing the Adoption of Sustainable Construction Practices in Abuja, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bala ABDULLAHI, Bala G. ABDURRAHMAN, Yusuf ALHASAN, Saidu B. ABUBAKAR, Bashir I. KUNYA, Raya K. ALDADAH, Saad MAHMOUD, Ahmed REZK, Effects of Truncating the Height of Compound Parabolic Collector on its Geometry, Optical and Thermal Performances , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Tina I. FRANCIS-AKILAKI, Raymond A. EKEMUBE, Design, Construction, and Performance Evaluation of an Efficient Ethanol Stove for Domestic Cooking Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Suleiman ZUBAIR, Hassan T. ABDULAZEEZ, Bala A. SALIHU, Gambo MOHAMMED, A Low-Cost, Offline-Capable Wireless Soil Moisture Monitoring System for Smallholder Farmers: Design, Validation, and Agronomic Impact , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mu’azu ABUBAKAR, Abubakar B. ALIYU, Dauda GARBA, Fabrication, Characterization, and Application of Clay-Based Ceramic Membranes for Oily Wastewater Treatment: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yahaya U. JAURO, Danladi D. USMAN, Lawan G. ABUBAKAR, Yusuf G. SHIMBURA, Aminu MOHAMMED, Design and Fabrication of Tapered Screw Briquetting Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Omokhafe J. TOLA, James G. AMBAFI, Umar S. DAUDA, Smart Fence for Real-Time Farm Protection in Sub-Saharan Africa Using Artificial Intelligence: A Systematic Review and Research Roadmap , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
