Solar-Powered Low-Cost Housing: Designing Off-Grid Communities with Interlocking Stabilised Soil Blocks (ISSB)
- Authors
-
-
Obafemi A. IBITOYE
Author
-
Jemimah O. TOLU-ALALADE
Author
-
- Keywords:
- Initial void ratio, Energy efficiency; Interlocking Stabilised Soil Blocks (ISSB); solar energy; off-grid housing; sustainable design.
- Abstract
-
This study explores the integration of solar photovoltaic (PV) systems with Interlocking Stabilised Soil Blocks (ISSB) to develop affordable, energy-efficient housing models for Nigeria’s off-grid communities. Using quantitative survey data from 424 respondents including architects, engineers, builders, and residents the research assessed awareness, perceived compatibility, affordability, and willingness to adopt ISSB–solar housing. Statistical analysis through chi-square, Pearson correlation, and ANOVA revealed a strong positive perception of ISSB–solar integration (mean = 4.12; SD = 0.78), with significant relationships between affordability and adoption (r = 0.52, p < .01) and between thermal comfort and energy efficiency (r = 0.47, p < .01). Over 70 % of participants affirmed that ISSB structures can safely support PV panels, and 65 % recognized reduced long-term energy costs despite higher initial investment. The findings demonstrate that coupling ISSB with solar systems enhances thermal comfort, promotes energy independence, and aligns with sustainable development goals. The study recommends financial incentives, technical capacity-building, and community-driven pilot projects to scale up solar-powered ISSB housing as a pathway toward resilient, low-carbon rural development in Nigeria.
- References
- Downloads
- Published
- 13-04-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Chinemeogo C. OZIOKO, Ikechukwu C.-E. IKE-EZE, Nnanyelugo O. EDWIN, Dimelu K. EBUBE, Charles MBOHWA, Investigation of the Mechanical and Thermal Properties of Waste Toner Powder Reinforced Polyester Composite for Industrial Applications , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad B. MUHAMMAD, Muhammad Y. ABDULLAHI, Aminu BALA, Optimal Reduction of Technical Power Losses in Radial Distribution Networks Using Differential Evolution for Distributed Generation: A Case Study of the Azare Substation in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Damilare L. ADEKEYE, Uche M. IROKA, A Microcontroller-Based Intelligent Electricity Theft Detection and Prevention System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Auwalu M. ABDULLAHI, Musa M. BELLO, Ado HARUNA, Amina I. KHALEEL, Lubabatu B. ILA, Abdurrahaman M. BELLO, Adaptive Hybrid Compliant Control of a Desktop Upper-Limb Rehabilitation Robot , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Ukange N. SYBIL, Hadiza A. UMAR, Ogar M. OKO, Habeebah A. KAKUDI, Usman MAHMUD, Alex AARON, Leveraging Quantum Machine Learning for Early Ovarian Cancer Diagnosis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mathew O. ADEOTI, Victor N. HARUNA, Omolayo M. IKUMAPAYI, Timothy A. ADEKANYE, Development and Characterization of Epoxy-Based Asbestos-Free Brake Pad Composites Reinforced with Cow Hoof Particulates , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abimbola J. KOLAWOLE, AbdulKodri G. ABDULRAFIU, An Evaluation of the Challenges and Limitations in the Adoption of Technological Innovations at Nnamdi Azikiwe International Airport , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Tunji J. ERINLE, Daniel C. UGURU-OKORIE, Abiodun M. ADEBIMPE, Adeolu A. ADEDIRAN, Hilary U. EZEA, A Comprehensive Review of In-Situ Monitoring and Post-Process Defect Detection in Additive Manufacturing , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Joshua T. AKINWAMIDE, Jacob O. EHIOROBO, Oluwayinka G. AKINWAMIDE, Geotechnical Evaluation of Lateritic Soil Index Properties in Ekiti State Districts, Southwestern Nigeria for Road Pavement Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Francis O. BOROKINNI, Olarewaju T. OGINNI, Ridwan O. RAJI, Kolawole ALONGE, Effects of Quenching Media and Heat Transfer Rate on the Hardness and Microstructure of Low-Carbon Steel , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
