A Low-Cost, Offline-Capable Wireless Soil Moisture Monitoring System for Smallholder Farmers: Design, Validation, and Agronomic Impact
- Authors
-
-
Suleiman ZUBAIR
Department of Telecommunication Engineering, Federal University of Technology, Minna, Nigeria
Author
-
Hassan T. ABDULAZEEZ
Department of Cyber-Security Science, Federal University of Technology, Minna, Nigeria
Author
-
Bala A. SALIHU
Department of Telecommunication Engineering, Federal University of Technology, Minna, Nigeria
Author
-
Gambo MOHAMMED
Department of Electrical and Electronic Engineering, Abdullahi Fodio University of Science and Technology, Aliero, Kebbi State, Nigeria
Author
-
- Keywords:
- Soil moisture monitoring, smart irrigation, capacitive sensor, GSM-SMS, ESP32, water-use efficiency, smallholder agriculture, open-source hardware, precision farming.
- Abstract
-
Water scarcity and inefficient irrigation practices significantly constrain agricultural productivity, particularly among smallholder farmers in sub-Saharan Africa. Although precision agriculture technologies offer potential solutions, most existing systems are costly, require continuous internet connectivity, or involve complex technical infrastructures, limiting their adoption in resource-constrained environments. This paper presents a low-cost, offline-capable wireless soil moisture monitoring and irrigation control system designed to address these challenges. The system integrates a capacitive soil moisture sensor, an ESP32 microcontroller, and GSM-based SMS communication to enable real-time, data-driven irrigation decisions without internet dependency. A relay-controlled actuator is automatically triggered when soil moisture falls below agronomically defined thresholds, while farmers receive timely SMS alerts. The system was evaluated through laboratory calibration and field-based experiments. Validation against gravimetric soil moisture measurements yielded a strong correlation (R^2=0.94), while classification accuracy across dry, moist, and wet soil states reached 95.6%. Experimental results during a 14-day tomato cultivation cycle demonstrated a 32% reduction in water usage compared to conventional fixed-schedule irrigation. The total hardware cost of the system is approximately $90 (₦77,400), and all design files, firmware, and calibration protocols are provided as open-source resources to support reproducibility and scalability. User evaluation involving eight smallholder farmers indicated high usability, timely notifications, and perceived improvements in crop health. This work uniquely combines embedded systems engineering with applied agronomy to deliver a scalable, affordable, and farmer-centric irrigation solution, contributing to sustainable water management in resource-limited agricultural systems..
- References
- Downloads
- Published
- 25-03-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Abimbola J. KOLAWOLE, AbdulKodri G. ABDULRAFIU, An Evaluation of the Challenges and Limitations in the Adoption of Technological Innovations at Nnamdi Azikiwe International Airport , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Murtala NAMAKKA, Abdulhamid S. ILIYASU, Utilisation of Supercritical Critical Fluids in Adsorption Process: A Comprehensive Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Benedict O. EDENSETING, Innocent O. OBOH, Alexander A. JOCK, Effective Food Waste Utilization: A Veritable Source of Biofuel for Nigerian Economic Sustenance and Development - A Review , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Samuel E. CHUKWU, Martins Y. OTACHE, Precious O. ATEMOAGBO, Emmanuel O. AGBESE, Copula-Based Modelling of Drought Severity-Duration-Frequency Relationship of Sokoto-Rima-River Basin, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, Francis O. BOROKINNI, Friday ONUH, Tunde O. OGUNDANA, Adebayo I. OLUMOROTI, Developments and Applications of Additive Manufacturing in the Automotive Industry , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Muhammad B. MUHAMMAD, Muhammad Y. ABDULLAHI, Aminu BALA, Optimal Reduction of Technical Power Losses in Radial Distribution Networks Using Differential Evolution for Distributed Generation: A Case Study of the Azare Substation in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Bolaji A. OMODUNBI, Hammed A. OLASUNKANMI, Development of an Ensemble Model for Email Filtering and Classification , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Toyin OKEBULE, Development of an Ocular Disease Prediction Using Deep Learning , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Abdulkarim AMINU, Mohammed ALIYU, Ibrahim S. MOHAMMED, Iyanda M. ANIMASHAUN, Peter DANIEL, Mohammad USMAN, Production and Optimisation of Parameters for Density and Ash Content of Briquettes Produced from Sorghum Stalks and Groundnut Shells Using African Locust Bean (Parkia biglobosa) Pulp as a Binding Agent , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Yusuf T. BAFFA, Muhammad Y. MUHAMMAD, Aliyu SHUAIBU, Enhanced Detection and Classification Models for Distributed Denial-of-Service Using Time-Based Features in Cybersecurity , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Taiwo J. DURODOLA, Suleiman ZUBAIR, James AGAJO, Open Radio Access Network (ORAN) Deployment Strategies for Remote Areas , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Suleiman ZUBAIR, Hassan ABDULAZEEZ, Bala A. SALIHU, Abubakar A. SHUAIBU, Design and Implementation of a BLE 5.0-Enabled Wearable Finger Mouse Using the XIAO nRF52840 Platform , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Isiaq O. ALABI, Hassan T. ABDULAZEEZ, Sulaiman AHMAD, Yahaya M. SANI, Scalability Versus Accuracy Trade-offs in Distributed Big Data Processing Frameworks: A Comparative Evaluation of Apache Spark, Flink, and Dask Using Benchmark Datasets , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abubakar LAWAL, Abdulkadir O. ABDULBAKI, Nathaniel SALAWU, Bala A. SALIHU, Mamman A. THOMAS, Abraham U. USMAN, Sub-6 GHz Millimeter-Wave Metamaterial Antenna with Reconfigurable Radiation Patterns for Enhanced Wireless Communication , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
