Performance Evaluation of Climate Products with Validation Using Bootstrapping and Climate Extremes in the Hadejia-Jama’are River Basin, Nigeria
- Authors
-
-
Idris M. WADA
Department of Agricultural Engineering, Faculty of Engineering, Federal University, Wukari, Nigeria
Author
-
Abba IBRAHIM
Department of Agricultural and Environmental Engineering, Faculty of Engineering, Bayero University, Kano, Nigeria
Author
-
Genesis ISHAYA
Department of Agricultural Engineering, Faculty of Engineering, Federal University, Wukari, Nigeria
Author
-
- Keywords:
- Climate Products, Compromise Programming, Multi-Criteria Group Decision Making, Hadejia-Jama’are River basin, Statistical evaluation, Climate extremes.
- Abstract
-
The increasing availability of satellite, reanalysis, and gauge-based Climate Products (CPs) has significantly advanced hydroclimatic research, particularly in data-scarce regions. Despite their usefulness, these CPs often carry substantial uncertainties, necessitating thorough evaluation before use in regional or basin-level studies. This study assesses the performance of nine precipitation and four temperature gridded datasets over the Hadejia-Jama’are River Basin (HJRB), Nigeria, using observational data from Kano, Jigawa, and Bauchi for the period 1990–2015. Daily and monthly precipitation (Pr), maximum temperature (Tmax), and minimum temperature (Tmin) temperature records were evaluated using Kling-Gupta Efficiency (KGE), Normalized Root Mean Square Error (NRMSE), Pearson correlation (r), Percentage Bias (PBIAS), and Mean Difference (MD). The fifth generation of the European Centre for Medium-Range Weather Forecasts (ERA5) dataset demonstrated superior performance in mean annual assessment for both Tmin and Tmax with minor underestimation. Tmax biases ranged from 2.2% to 3.5% and Tmin from 0.3% to 2.1%. Climate Forecast System Reanalysis (CFSR) had the weakest performance among the temperature products. The Climate Hazards Group InfraRed Precipitation with Station data (CHIRPS) outperformed other precipitation products, with modest underestimations of 3.5% (Kano), 9% (Bauchi), and 12% (Jigawa), while Climate Prediction Center (CPC) showed the poorest alignment with observed data. Monthly statistical evaluations yielded stronger statistical performance than daily analyses, especially for temperature datasets. For precipitation, correlation coefficients exceeded 0.5 across all models at daily resolution, with CHIRPS showing the highest values. Overall model ranking using Compromise Programming Index (CPI) and Multi-Criteria Group Decision-Making Method (MCGDM) confirmed ERA5 (for Tmax and Tmin) and CHIRPS (for precipitation) as the most reliable products. Further validation using climate extremes and bootstrapped uncertainty analysis showed that the ratio of modeled to observed extremes consistently exceeded 0.5, indicating suitability for hydrological applications. The bootstrapped 95% uncertainty bands were narrow, reflecting low uncertainty in the selected CPs. ERA5 and CHIRPS emerged as the most robust datasets for hydroclimatic studies in the Hadejia-Jama’are River Basin.
- References
- Downloads
- Published
- 08-08-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Dauda ALI, Auwal SHUAIBU, Design and Performance Evaluation of Plastic–Sand Interlocking Blocks Using Waste Polyethylene Terephthalate (PET) and Low-Density Polyethylene (LDPE) for Sustainable Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Nafisa A. ABDULHAMID, Danladi D. USMAN, Kabiru I. JAHUN, Rotkangmwa J. SATI, Yahaya U. JAURO, Abdulmajid M. HASHIR, Yusuf G. SHIMBURA, Development of a Solar Dryer with Multi-Products and a Residual Moisture Control System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mokọ́ládé JOHNSON, Bashir SALIM, Enobong EQUERE, Miriam I. CHUKWUMA-UCHEGBU, Emma EKPO, Ali B. ABDULSALAM, Conserving Indigenous Geometries: A Vital Approach to Integrating Cultural Heritage into Architectural Education , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adebola S. AKOLADE, Precious A. OLAOMOTITO, Abibat Y. ADEBIYI, Oluwatunmise P. ABOLARIN, Opeyemi I. ADETUNJI, Kola OGEDENGBE, Production and Evaluation of Cement-Bonded Composites Board Made from Banana Pseudo Stem , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Tahiru MOHAMMED, Muhammad B. MAINA, Abba B. MUHAMMAD, Muhammad SHUWA, From Local Sand to Functional Silicon: An Integrated Pathway for Producing Photovoltaic-Grade Material from Nigerian Silica Sand , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Daniel N. MBACHIRIN, David E. ABEL, Paul A. OMALE, Precision Agriculture Technologies for Smallholder Farming Systems in Developing Countries: A Scoping Review of Opportunities, Limitations and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Iyanda M. ANIMASHAUN, Abubakar S. MOHAMMED, Ibrahim A. KUTI, Peter A. OBASA, Rashidat ANIYIKAYE, Yahaya MOHAMMED, Yusuf M. OTACHE, Artificial Intelligence of Things (AIoT) for Precision Irrigation: A Comprehensive Review of Applications, Challenges, and Future Directions , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Jennifer BALA, Sikiru O. SUBAIRU, Noel M. DOGONYARO, Joseph A. OJENIYI, Suleiman AHMAD, Development of an Optimized Hybrid XGBoost–GRU Model for Detection of Ponzi Schemes in Ethereum Transaction Networks , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Amina N. IBRAHIM, Petrus NZEREM, Mojeed O. OLOGUN, Formulation and Evaluation of Drilling Fluids from Waste Engine Oil and Algae-Based Surfactants , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Sulaiman Y. ADAMU, Fadimatu N. DABAI, Abdulazeez Y. ATTA, Baba Y. JIBRIL, Preparation and Characterization of Enhanced Hierarchical Zn-Ni/HZSM-5 Catalysts for Potential use in Catalytic reactions to Upgrade Bio-Oil and Hydrogen from Biomass Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
