Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review
- Authors
-
-
Sirajo ALHASSAN
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
Abdullahi A. ADAMU
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
Mohammed T. JIMOH
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
- Keywords:
- Waste-to-Energy (WtE) Systems, Municipal Solid Waste Management, Multi-Criteria Decision Analysis (MCDA), Multi-Objective Optimization, Sustainable Infrastructure Planning, Decision-Support Systems, Developing Urban Systems.
- Abstract
-
Waste-to-Energy (WtE) systems are increasingly recognized as a strategic solution for sustainable municipal solid waste management, particularly in rapidly urbanizing regions confronted with landfill scarcity, environmental pressures, and rising energy demand. However, the selection and design of appropriate WtE systems require simultaneous consideration of economic viability, environmental performance, technical feasibility, and socio-institutional acceptance. This study presents a systematic review and critical synthesis of methodological approaches applied in WtE planning, with particular emphasis on Multi-Criteria Decision Analysis (MCDA), mathematical optimization models, multi-objective programming, metaheuristic algorithms, and hybrid MCDA–optimization frameworks. The review examines the evolution, applications, strengths, and limitations of these approaches in supporting technology selection, facility siting, system configuration, and resource allocation decisions. Findings indicate that MCDA techniques are effective in incorporating stakeholder preferences and qualitative sustainability criteria, but lack detailed engineering-level system design capability. In contrast, optimization models provide rigorous quantitative frameworks for operational feasibility and infrastructure configuration, yet often underrepresent social, institutional, and governance constraints. Hybrid frameworks emerge as the most comprehensive methodological direction, integrating preference-based evaluation with constraint-based system modeling to enhance both strategic alignment and technical robustness. The study identifies critical research gaps, including insufficient treatment of uncertainty, limited empirical validation, and inadequate contextual adaptation to developing urban environments characterized by data constraints and institutional fragmentation. By synthesizing methodological trends and challenges, this review advances structured, context-sensitive decision-support systems for sustainable and implementable WtE planning.
- References
- Downloads
- Published
- 23-03-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Usman A. ABDURRAHMAN, Abdulkadir A. BICHI, Usman HARUNA, Akibu M. ABDULLAHI, A Hybrid Graph Neural Network Framework Integrating Handcrafted Features for Real-Time Iris Recognition in Motion , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Kamoru O. OLADOSU, Kabiru MUSTAPHA, Ayodeji S. OLAWORE, Akeem B. IBRAHIM, Abdulganiyu ISSA, Development of a Free-Fall Pyrolysis Reactor for Biofuel Production Using Sugarcane Bagasse and Cassava Rhizomes as Feedstocks , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Jamesmary E. AYANRU, Matthew S. ABOLARIN, Omotayo I. OGUNWEDE, Henry I. MORKAH, Adeshola O. OPENIBO, Development and Performance Evaluation of a Dryer for Preserving Vegetable Leaves , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mohammed U. GARBA, Musa A. ABDULLAHI, Isah RABI, Saadatu A. GORO, Habibu UTHMAN, Abubakar S. MOHAMMED, Umaru AHMADU, Usman S. ONODUKU, Recovery of Lithium Carbonate from Nigerian Lepidolite Ore via Roasting-Leaching-Precipitation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Onyeka E. NNANYELUGO, Peter O. OFFOR, Cyril OCHERI, Camillus S. OBAYI, Optical and Structural Properties of Er/Sr Co-Doped αMnS Films Prepared by Chemical Spray Pyrolysis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mohammed A. GANA, Zaka A. MSHELIA, Isuwa S. AJI, Alhaji GUJJA, Lawan A.M. KOLO, Investigation and Comparative Analysis of Natural Moulding Sands from Five Deposits in Maiduguri, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Isaac O. OLAOYE, Design Modification and Performance Evaluation of an Existing Cashew Nut Shell Liquid (CNSL) Extraction Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Kamardeen A. OGUNBAJO, Benjamin I. UGHEOKE, Ibrahim D. MUHAMMAD, Emmanuel ONCHE, Application of Upper Bound Analysis and Taguchi Method in Aluminium Extrusion , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, The Impact of Industry 4.0 on New Product Development in Small and Medium Enterprises: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Zakariah A. ADEJOH, Hawawu SALAMI, Abdullahi M. EVUTI, Yahaya S. MOHAMMAD, Yakubu STEPHEN, Effect of Activation Time on Physicochemical Properties of Activated Carbon Prepared from Coconut Shell , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
