Multi-Criteria Decision Analysis and Optimization Approaches in Sustainable Waste-to-Energy Planning: A Systematic Review
- Authors
-
-
Sirajo ALHASSAN
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
Abdullahi A. ADAMU
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
Mohammed T. JIMOH
Department of Mechanical Engineering, Bayero University, Kano, Nigeria
Author
-
- Keywords:
- Waste-to-Energy (WtE) Systems, Municipal Solid Waste Management, Multi-Criteria Decision Analysis (MCDA), Multi-Objective Optimization, Sustainable Infrastructure Planning, Decision-Support Systems, Developing Urban Systems.
- Abstract
-
Waste-to-Energy (WtE) systems are increasingly recognized as a strategic solution for sustainable municipal solid waste management, particularly in rapidly urbanizing regions confronted with landfill scarcity, environmental pressures, and rising energy demand. However, the selection and design of appropriate WtE systems require simultaneous consideration of economic viability, environmental performance, technical feasibility, and socio-institutional acceptance. This study presents a systematic review and critical synthesis of methodological approaches applied in WtE planning, with particular emphasis on Multi-Criteria Decision Analysis (MCDA), mathematical optimization models, multi-objective programming, metaheuristic algorithms, and hybrid MCDA–optimization frameworks. The review examines the evolution, applications, strengths, and limitations of these approaches in supporting technology selection, facility siting, system configuration, and resource allocation decisions. Findings indicate that MCDA techniques are effective in incorporating stakeholder preferences and qualitative sustainability criteria, but lack detailed engineering-level system design capability. In contrast, optimization models provide rigorous quantitative frameworks for operational feasibility and infrastructure configuration, yet often underrepresent social, institutional, and governance constraints. Hybrid frameworks emerge as the most comprehensive methodological direction, integrating preference-based evaluation with constraint-based system modeling to enhance both strategic alignment and technical robustness. The study identifies critical research gaps, including insufficient treatment of uncertainty, limited empirical validation, and inadequate contextual adaptation to developing urban environments characterized by data constraints and institutional fragmentation. By synthesizing methodological trends and challenges, this review advances structured, context-sensitive decision-support systems for sustainable and implementable WtE planning.
- References
- Downloads
- Published
- 23-03-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Michael R. ADU, Afeez O. OLAWUNMI, Design and Implementation of an IoT-Based Smart Attendance System , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Habib I. ABDULAZEEZ, Bala ABDULLAHI, Abdullahi AHMED, Ibrahim A. TUKUR, Experimental Investigation of Solar Photovoltaic Tilt Angles for Maximum Energy Harvest in Kogi State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Abdulrasheed MUSTAPHA, Kolawole O. MORAKINYO, Seyi O. FARODOYE, Rilwan B. HABEEB, Oluwatimilehin I. ADEBAMBO, Sunday F. OLAWALE, Evaluation of Green Architectural Strategies for Thermal Comfort in Four-Star Hotels in Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Auwalu M. ABDULLAHI, Musa M. BELLO, Ado HARUNA, Amina I. KHALEEL, Lubabatu B. ILA, Abdurrahaman M. BELLO, Adaptive Hybrid Compliant Control of a Desktop Upper-Limb Rehabilitation Robot , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yusuf L. SHUAIB-BABATA, Kabiru S. AJAO, Yusuf O. BUSARI, Ibrahim O. AMBALI, Toheeb A. NURUDEEN, John A. OKOLO, Gabriel A. LONGE, Inhibitory Potential of Blended Parkia biglobosa and Delonix regia Extracts on Corrosion of AISI 1007 Steel in 1.0 M Hydrochloric Acid Medium , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Sati C. NSHOL, Saeed Y. UMAR, Suleiman A. YERO, Modification of the Engineering Properties of Road Base Course Soil Materials with Cement and Polyethylene Terephthalate (PET) , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Olusegun A. AFOLABI, Olanrewaju A. OLANITE, Nsikan L. AKPAN, Design and Simulation of a Synchronous Reference Frame-Based Active Power filter for Harmonic Mitigation , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mohammed U. GARBA, Musa A. ABDULLAHI, Isah RABI, Saadatu A. GORO, Habibu UTHMAN, Abubakar S. MOHAMMED, Umaru AHMADU, Usman S. ONODUKU, Recovery of Lithium Carbonate from Nigerian Lepidolite Ore via Roasting-Leaching-Precipitation , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ameh RICHARD, Sani B. MUHAMMAD, Terver AUSE, Umar SHEHU, Assessment of the Suitability of Wusasa Clay for Refractory Bricks Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Koliya LAAYE, Solomon O. OGUCHE, Ibrahim I. JIDDA, Abdullahi A. ADAMU, Economic Viability of Waste-to-Energy: Pathways for Sustainable Power Generation in Jalingo, Taraba State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Sirajo ALHASSAN, Abdullahi A. ADAMU, Mohammed T. JIMOH, Experimental Characterization and Seasonal Energy Potential Assessment of Municipal Solid Waste in Kano City, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
