Design and Construction of Dual Input Mobile Solar Generator for Reliable Off-Grid Power
- Authors
-
-
Zaharaddeen MUSA
Department of Electrical and Electronics Engineering, Federal University Dutsin-Ma, Katsina State, Nigeria
Author
-
Aliyu BELLO
Department of Electrical and Electronics Engineering, Federal University Dutsin-Ma, Katsina State, Nigeria
Author
-
Haris A. DANLADI
Department of Electrical and Electronics Engineering, Aliko Dangote University of Science and Technology Wudil, Kano State, Nigeria
Author
-
- Keywords:
- Solar Generator, Dual Input Hybrid Power System, AC/DC Microgrid, Renewable Energy, Off-Grid Electrification.
- Abstract
-
Irregular electricity supply remains a persistent challenge in many developing communities, including Dutsin-Ma in Katsina State, Nigeria. Frequent outages, poor voltage quality, and heavy reliance on expensive fuel-powered generators hinder household comfort, business operations, and overall socio-economic development. Although renewable energy offers a viable alternative, conventional solar generators exhibit performance limitations during periods of low solar irradiance, resulting in unreliable backup power. This study presents the design and performance evaluation of a Dual Input Mobile Solar Generator with hybrid charging capability, supporting both DC solar charging and AC grid charging. The dual-input configuration enhances system flexibility, minimizes charging downtime, and significantly improves energy accessibility compared to solar-exclusive systems. The generator is fully portable, enabling easy deployment across households, business premises, construction sites, outdoor events, and emergency response locations. Field relevance in Dutsin-Ma demonstrates its practicality, where solar charging supports daytime energy demands while intermittent grid availability enables supplementary AC charging to maintain battery continuity. The proposed hybrid system reduces dependence on petrol generators, improves power reliability, and provides clean, cost-effective energy for households, schools, and small enterprises. Overall, the findings highlight the potential of hybrid solar technologies to strengthen energy resilience in weak-grid regions and contribute to sustainable development.
- References
- Downloads
- Published
- 27-12-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Salisu MOHAMMED, Abdulfatai JIMOH, Abdullahi M. EVUTI, Abdulwahab GIWA, Abubakar A. IBRAHIM, Pretreatment and Characterization of Selected Precursors for Chitin/Chitosan Production , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Anthony U. AINETOR, Martins ILEVBARE, Awareness of the Availability and Use of Domestic Control Systems and Automation among the University of Benin Resident Staff , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Caleb A. ABORISADE, Jide E.T. AKINSOLA, Ifeoluwa M. OLANIYI, Fathia O. ONIPEDE, Emmanuel A. OLAJUBU, Ganiyu A. ADEROUNMU, Machine Learning-Based Polycystic Ovary Syndrome Generative Modelling via Ensemble Learning and Neural Networks for Infertility Prediction , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Mohammed B. ABDULLAHI, Impact of Agro-Chemicals on Groundwater Quality and Soils of Irrigation Sites: A Case Study of Chanchaga Irrigation Scheme, Minna, Niger State , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adegoke P. ADEBOLA, Abubakar S. MOHAMMED, Umaru MUSA, Abubakar A. IBRAHIM, Abubakar G. ISAH, Mohammed U. GARBA, Development of Coconut Shell Hydrochar for Lead Removal from Pharmaceutical Wastewater , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Zachariah S. PYENDANG, Felix ACHEMA, Isheni YAKUBU, Solomon E. APEH, Microstructural Characterization of Fibre Reinforced Polymer (FRP) Composite (Kenaf Fibre and Polyester Resin) for Structural Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Enakhe P. OTSUPIUS, Nihad ACHEKUOGENE, Influence of Additive Manufacturing Process on the Fatigue of Polymer Materials: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Peter C. ANYAORA, Emily T. KORMENE, Andrew A. UDUIMOH, Temple C. OKEAHIALAM, Callistus T. IKWUAZOM, Lasotte B.-M. YAKUBU, Franklyn O. OFOH, Rukayat B. AHMED, Systematic Literature Review on Hate Speech Detection Technology with English and Mixed Language on Social Media Space , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Luqman K. SALATI, Sani D. MUHAMMAD, Jacob T. ADEYEMO, Simulation of Trucks Haulage Operation at Ashaka Cement Company in Gombe State, North-Eastern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Aminu D. MAHMUD, Imran N. IBRAHIM, Development and Optimization of Starch-Based Bioplastics from Millet and Cassava Using Mixture Design Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
