Techno-Economic Optimization of a Hybrid PV-Wind-Waste-to Energy System for the University of Maiduguri
- Authors
-
-
Hafsah A. ABDULRAHMAN
Department of Mechanical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
Muhammad M. HAMIDU
Department of Mechanical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
- Keywords:
- HOMER Pro Simulation, Hybrid Renewable Energy System, Solar–Wind–Biogas Integration, Techno-Economic Optimization and Waste-to-Energy (WTE).
- Abstract
-
The University of Maiduguri has struggled with power outages all the time because the national grid is unstable, diesel prices are high, and the amount of trash on campus is growing. This study examines a hybrid solar photovoltaic-wind-waste-to-energy (WTE) system as a sustainable alternative that enhances energy security and mitigates waste disposal issues. The main aim was to design and improve a reliable hybrid system that could meet the university's needs for electricity for academic, administrative, and residential purposes. HOMER Pro used hourly load profiles, solar radiation, wind speed, temperature data, and the amount of municipal solid waste available to create models. Then, it analyzed different system configurations based on Net Present Cost (NPC), Levelized Cost of Energy (LCOE), renewable fraction, and operational performance. The results show that the PV–wind–biogas–battery configuration provides the most cost-effective solution with a 100% renewable fraction. The optimal system has 16,812 kW of PV power, 2,434 kW of wind power, a 500-kW biogas generator, 17,972 kWh of lead-acid storage, and a 3,718-kW bidirectional converter. Solar PV contributes the highest annual energy output, supported by wind generation during low-irradiance months. The biogas unit, fuelled by an average of 26.5 tonnes of daily campus waste, provides stable power that keeps the system running during times when renewable energy is weak. With little unmet load and strong seasonal resilience, the total annual generation (44.65 GWh) greatly surpasses the campus load. According to the study's findings, UNIMAID can achieve a reliable power supply while converting its waste stream into an energy resource by combining PV, wind, and WTE. As future demand increases, it is advised that the university implement this configuration, enhance waste collection systems, and gradually expand the hybrid system.
- References
- Downloads
- Published
- 22-12-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Mordecai C. EZEALOR, Bosede A. ORHEVBA, Ruth O. OYEBAMIJI, Quality Evaluation of Yogurt Produced from Chili Pepper-Derived Starter Culture , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Yusuf L. SHUAIB-BABATA, Kabiru S. AJAO, Yusuf O. BUSARI, Ibrahim O. AMBALI, Kehinde O. ARUNA, Henrietta O. COKER, Toheeb A. NURUDEEN, Evaluation of UNILORIN Dam Moulding Sand Properties for Foundry Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Isaac O. UKRAKPO, Osemwegie IKPONMWOSA-EWEKA, Prediction of Weld Strain Using Artificial Neural Network: A Modeling Approach , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Tina I. FRANCIS-AKILAKI, Onimi O. ASHAMA, Raymond A. EKEMUBE, Vibration Analysis as a Transformative Approach to Condition-Based Monitoring , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Esther M. GANA, Influence of Process Variables on the Adsorption of Methylene Blue from Aqueous Solution Using Iron-Modified Zeolite A , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Enakhe P. OTSUPIUS, Nihad ACHEKUOGENE, Influence of Additive Manufacturing Process on the Fatigue of Polymer Materials: A Review , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Bala YAHAYA, Mukhtar N. YAHYA, Characterization of Soil Properties Under Continuous Irrigation Practice , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ahmad IDRIS, Evaluation of Challawa Tannery Wastewater as Mixing and Curing Water for Concrete Production , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Chioma I. MADUEKE, Reginald UMUNAKWE, Oluwole D. ADIGUN, An Evaluation of the Porosity and Pore Volume Fractions of Coir Fibres in Relation to Their Diameters and Tensile Properties at a Crosshead Displacement Rate of 0.5 mm/Minute for Composite Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 2 (2026): December 2026
- Yusuf M. YAHAYA, Factors Contributing to the Erosion of Freehand Sketching Competence in Technology Education: A Case Study of Bayero University, Kano , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Muhammad M. HAMIDU, Mathew KATAMBI, Omar FARUQ, Techno-Economic and Environmental Assessment of a Solar PV-Based Microgrid for Residential Electrification in Gwange I, Maiduguri Using HOMER Pro , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Development of MATLAB-Based Model for Solar Radiation Prediction and Photovoltaic Panel Tilt Optimization Angle for Maiduguri Region, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Abubakar M. EL-JUMMAH, Muhammad SHUWA, An Assessment of Power Sources for Improved Energy Supply in University of Maiduguri , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
