Techno-Economic Optimization of a Hybrid PV-Wind-Waste-to Energy System for the University of Maiduguri
- Authors
-
-
Hafsah A. ABDULRAHMAN
Department of Mechanical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
Muhammad M. HAMIDU
Department of Mechanical Engineering, University of Maiduguri, Maiduguri, Nigeria
Author
-
- Keywords:
- HOMER Pro Simulation, Hybrid Renewable Energy System, Solar–Wind–Biogas Integration, Techno-Economic Optimization and Waste-to-Energy (WTE).
- Abstract
-
The University of Maiduguri has struggled with power outages all the time because the national grid is unstable, diesel prices are high, and the amount of trash on campus is growing. This study examines a hybrid solar photovoltaic-wind-waste-to-energy (WTE) system as a sustainable alternative that enhances energy security and mitigates waste disposal issues. The main aim was to design and improve a reliable hybrid system that could meet the university's needs for electricity for academic, administrative, and residential purposes. HOMER Pro used hourly load profiles, solar radiation, wind speed, temperature data, and the amount of municipal solid waste available to create models. Then, it analyzed different system configurations based on Net Present Cost (NPC), Levelized Cost of Energy (LCOE), renewable fraction, and operational performance. The results show that the PV–wind–biogas–battery configuration provides the most cost-effective solution with a 100% renewable fraction. The optimal system has 16,812 kW of PV power, 2,434 kW of wind power, a 500-kW biogas generator, 17,972 kWh of lead-acid storage, and a 3,718-kW bidirectional converter. Solar PV contributes the highest annual energy output, supported by wind generation during low-irradiance months. The biogas unit, fuelled by an average of 26.5 tonnes of daily campus waste, provides stable power that keeps the system running during times when renewable energy is weak. With little unmet load and strong seasonal resilience, the total annual generation (44.65 GWh) greatly surpasses the campus load. According to the study's findings, UNIMAID can achieve a reliable power supply while converting its waste stream into an energy resource by combining PV, wind, and WTE. As future demand increases, it is advised that the university implement this configuration, enhance waste collection systems, and gradually expand the hybrid system.
- References
- Downloads
- Published
- 22-12-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Danladi K. GARBA, Emmanuel O. AWEDA, Nuhu A. ADEMOH, Fredrick NGOLEMASANGO, Pascal A. UBI, Akor TERNGU, Lawal KABIR, Shuaibu O. YAKUBU, The Effects of Gum Arabic Matrix on the Hardness and Water Absorption of Agro-Based (Banana Pseudostem) Hybrid Composites , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Bosede A. ORHEVBA, Sodeeq A. OLAJIDE, Optimization of Alkaline Pretreatment and Fermentation Conditions for Improved Physicochemical Properties and Yield of Bioethanol Produced from Sugarcane Bagasse , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Anthony U. AINETOR, Martins ILEVBARE, Awareness of the Availability and Use of Domestic Control Systems and Automation among the University of Benin Resident Staff , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Musibaudeen O. IDRIS, Busayo S. ADEBOYE, Rasheedah A. AYOOLA, Abiodun G. ABIOYE, Abideen T. OYEWO, An Artificial Neural Network-Based Quality Control Framework for Nigerian Manufacturing Industries , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Peter EDOKA, Incidents of Flood Disaster in Kaduna: Preventive and Mitigating Measures , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Zainab B. LAPAI, Joseph A. OJENIYI, Ismail IDRIS, Abdulkadir O. ABDULBAKI, Jennifer BALA, Entropy-Guided Neural Architecture for Family-Level Classification of Windows Ransomware , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Ojo I. ENOCK, Ibrahim A. SAIDU, Ibrahim SULAIMAN, Oluwafeyisikemi. Y. ENOC, Design and Development of a Melon Shelling Machine , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Kazeem A. BELLO, Adeniyi O. ADESINA, Lukman A. OPEYEMI, Solomon O. UVIASE, Francis O. BOROKINNI, Friday ONUH, Tunde O. OGUNDANA, Adebayo I. OLUMOROTI, Developments and Applications of Additive Manufacturing in the Automotive Industry , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Martins Y. OTACHE, Iyanda M. ANIMASHAUN, Sadeeq A. MOHAMMED, Emmanuel O. AGBESE, Spatiotemporal Variability and Trend Analysis of Rainfall and Temperature in Northern Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Usman A. ABDURRAHMAN, Abubakar A. ROGO, Abdulkadir A. BICHI, Akibu M. ABDULLAHI, Beyond Overload: Assessing Cognitive Load to Facilitate Learning Transfer in Virtual Environments , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
Most read articles by the same author(s)
- Muhammad M. HAMIDU, Mathew KATAMBI, Omar FARUQ, Techno-Economic and Environmental Assessment of a Solar PV-Based Microgrid for Residential Electrification in Gwange I, Maiduguri Using HOMER Pro , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Development of MATLAB-Based Model for Solar Radiation Prediction and Photovoltaic Panel Tilt Optimization Angle for Maiduguri Region, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Muhammad M. HAMIDU, Abubakar M. EL-JUMMAH, Muhammad SHUWA, An Assessment of Power Sources for Improved Energy Supply in University of Maiduguri , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
