Development of a Free-Fall Pyrolysis Reactor for Biofuel Production Using Sugarcane Bagasse and Cassava Rhizomes as Feedstocks
- Authors
-
-
Kamoru O. OLADOSU
Department of Mechanical Engineering, Kwara State University, Malete, Kwara State, Nigeria
Author
-
Kabiru MUSTAPHA
Department of Material Science and Engineering, Kwara State University, Malete, Kwara State, Nigeria
Author
-
Ayodeji S. OLAWORE
Department of Mechanical Engineering, Kwara State University, Malete, Kwara State, Nigeria
Author
-
Akeem B. IBRAHIM
Department of Mechanical Engineering, Kwara State University, Malete, Kwara State, Nigeria
Author
-
Abdulganiyu ISSA
Department of Mechanical Engineering, Kwara State Polytechnic, Ilorin, Nigeria
Author
-
- Keywords:
- Free-fall reactor, sugarcane bagasse, cassava rhizome, pyrolysis, biofuel.
- Abstract
-
This study presents the design, fabrication, and evaluation of a free-fall reactor with a capacity of 1 kg/hr for biofuel production from sugarcane bagasse (SCB) and cassava rhizome (CR). The reactor was designed based on particle heating rate and free-fall velocity principles, with a heating rate of 50°C/min. Experiments were conducted using various blends of SCB and CR at temperatures ranging from 400°C to 650°C, with a residence time of 30 minutes. The results showed that a 50:50 blend of SCB and CR yielded the highest bio-oil yield of 36.2%, with a corresponding heating value of 23.6 MJ/kg. At an operating temperature of 550°C, the yields of biochar and biogas were 16.2% and 47.6%, respectively. This study demonstrates the feasibility and sustainability of utilizing agricultural residues for bioenergy production through free-fall pyrolysis, offering a promising solution to the energy crisis in developing nations.
- References
- Downloads
- Published
- 13-09-2025
- Section
- Articles
- License
-
Copyright (c) 2025 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Sarafa ISHOLA, Olusegun S. OLAOYE, Adeyinka A. ADEGBOLA, Isaac A. OLUREMI, Oluseye O. AGBEDE, Drying Kinetics and Combustion Characteristics of Carbonized Cashew Nut Shell Briquettes Under Open Sun, Passive and Active Solar Drying , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oluwadare J. AKINDUGBAGBE, Adefope OWOJORI, Emmanuel AGBENYI, Babatunde ADEBO, Gamma Shielding Capabilities of Some Selected Materials Within Ibadan Metropolis , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Yahaya U. JAURO, Danladi D. USMAN, Lawan G. ABUBAKAR, Yusuf G. SHIMBURA, Aminu MOHAMMED, Design and Fabrication of Tapered Screw Briquetting Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Vincent B. ONIGBARA, Muftau A. GBENLE, Sunday I. AGU, Mechanical and Biological Performance of Titanium Hydroxyapatite Composites for Biomedical Applications , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Raphina O. UBAH, Oluwaseun S. OGUNGBEMI, Olabode O. OLUTOMILOLA, Impact of Open Dumpsites on Groundwater Quality: Geophysical and Hydrochemical Evidence from Ijan-Ekiti, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Nnamdi S. OKOMBA, Adedayo A. SOBOWALE, Adebimpe O. ESAN, Bolaji A. OMODUNBI, Taiwo A. AWOYEMI, Development of an Intelligent-Based Elevator System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Tina I. FRANCIS-AKILAKI, Raymond A. EKEMUBE, Design, Construction, and Performance Evaluation of an Efficient Ethanol Stove for Domestic Cooking Application , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Abdulrahman B. GAMBO, Carbon Capture and Mechanical Design of Membrane Reactors: A Systematic Review and Design-Performance Framework for Sustainable Energy Systems , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Yusuf M. YAHAYA, Factors Contributing to the Erosion of Freehand Sketching Competence in Technology Education: A Case Study of Bayero University, Kano , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Mukhtar N. YAHYA, Sohaib ALHAJHUSSEIN, Wastewater Analysis Using Kubota Membrane Bioreactor System , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
You may also start an advanced similarity search for this article.
