Performance Evaluation and Design Analysis of Hybrid Constructed Wetlands for Aquaculture Effluent Treatment under Tropical Conditions
- Authors
-
-
Paramdi S. ABARI
Author
-
Abdulwahab O. AUDU
Author
-
Ahmad-Tijani USMAN
Author
-
Charity T. METIBOBA
Author
-
Peter O. ANIKOH
Author
-
- Keywords:
- Hybrid constructed wetlands, aquaculture wastewater, horizontal subsurface flow, vertical subsurface flow, pollutant removal efficiency, sustainable wastewater treatment.
- Abstract
-
Aquaculture wastewater discharge has become a significant environmental concern because of the release of nutrient-rich effluents into natural water bodies. This study evaluated the treatment performance and design efficiency of a laboratory-scale hybrid constructed wetland (HCW) system developed for aquaculture effluent treatment under tropical climatic conditions. The hybrid system consisted of horizontal subsurface flow (HSSF) and vertical subsurface flow (VSSF) wetland units operated under planted and unplanted conditions using Sacciolepis africana as the test macrophyte. Aquaculture wastewater was collected from Musgola Fish Farm located in Minna, Niger State, Nigeria, and monitored over a 23-week experimental period. Physicochemical parameters including biological oxygen demand (BOD5), chemical oxygen demand (COD), total suspended solids (TSS), total dissolved solids (TDS), total nitrogen (TN), sulphate (SO4²⁻), and calcium (Ca²⁺) were analyzed using standard APHA methods. Hydraulic retention time, hydraulic loading rate, porosity, and wetland dimensions were incorporated into the wetland design calculations. Results showed that the planted VSSF unit recorded the highest pollutant removal efficiencies of 90.1% for BOD5, 88.2% for COD, 77.7% for TSS, 58.2% for TDS, and 57.4% for TN. Statistical analysis using one-way ANOVA indicated significant differences (p < 0.05) between planted and unplanted systems. The study demonstrates that hybrid constructed wetlands provide an efficient, low-cost, and environmentally sustainable technology for aquaculture wastewater treatment in developing countries.
- References
- Downloads
- Published
- 23-05-2026
- Section
- Articles
- License
-
Copyright (c) 2026 FUDMA Journal of Engineering and Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
How to Cite
Similar Articles
- Abdullahi P. NUHU, Kabir O. YUSUF, Aliyu O. ABDULRAHMAN, Kehinde A. LASISI, Effect of Heat Treatment on Post Weld Railway Track , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Olusiji A. ADEYANJU, Joseph O. OLAIDE, Machine Learning Models for Predicting Flow Rate for Niger Delta Oil Wells , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Oluwasanmi S. ADANIGBO, Opeyemi O. ASAOLU, Adedayo A. SOBOWALE, Temidayo AKINDAHUNSI, Akinbayode A. ASAOLU, Intrusion Detection in Mobile Adhoc Networks: A Review of Signature-Based, Anomaly-Based, and Hybrid Approaches , FUDMA Journal of Engineering and Technology: Vol. 1 No. 2 (2025): December 2025
- Afeez A. AWOLOKUN, Olusegun O. ALUKO, Temitope F. AWOLUSI, Mayowa A. OGIDI, Performance Evaluation of Pervious Concrete Containing Glass Cullet and Glass Powder for Sustainable Construction , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Olabanji M. KADI, Sustainability in Construction: A Quantity Surveyor's Perspective on Green Building Practices , FUDMA Journal of Engineering and Technology: Vol. 1 No. 1 (2025): July 2025
- Bala ABDULLAHI, Bala G. ABDURRAHMAN, Yusuf ALHASAN, Saidu B. ABUBAKAR, Bashir I. KUNYA, Raya K. ALDADAH, Saad MAHMOUD, Ahmed REZK, Effects of Truncating the Height of Compound Parabolic Collector on its Geometry, Optical and Thermal Performances , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Mela I. L. LASHIRU, Ganiyu A. BAKARE, Sabo M. HASSAN, Kamilu O. LAWAL, Data-Driven Observability Enhancement in Active Distribution Networks via Optimal Co-Deployment of DGs and D-PMUs Using Hybrid APSO-ASDA , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Isaac O. OLAOYE, Design Modification and Performance Evaluation of an Existing Cashew Nut Shell Liquid (CNSL) Extraction Machine , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Auwalu M. ABDULLAHI, Musa M. BELLO, Ado HARUNA, Amina I. KHALEEL, Lubabatu B. ILA, Abdurrahaman M. BELLO, Adaptive Hybrid Compliant Control of a Desktop Upper-Limb Rehabilitation Robot , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
- Adegboyega L. ALUKO, Ayodeji T. BALOGUN, Environmental Impact of Gold Mining Activities and Sustainable Mitigation Approaches: Case Study of Ilesa Surrounding areas, Osun State, Nigeria , FUDMA Journal of Engineering and Technology: Vol. 2 No. 1 (2026): June 2026
You may also start an advanced similarity search for this article.
